Able to detect the presents or non-presents of water.
LED for status.
-20 °C~60 °C
4 °F~140 °F
Pull Force Limit
Not to exceed 50 lb.
2 in. (50 mm) minimum
Loads greater than 20 lb (9 kg) per linear inch at 20°C (68°F) may immediately trigger an alarm.
RJ-45 jack to sensor using UTP Cat 5 wire.
Communications Cable Max. Length
The Rope Water Sensor can be extended from the RJ-45 Intelligent Sensor ports on the base units up to 100 feet, or 30 meters using standard CAT5/6 LAN cable.
Comes fully assembled including the Water sensing rope, the non-sensing cable that connects the rope to the sensing module and the main sensing module that connects via CAT5 LAN cable to the sensorProbe / securityProbe 5E.
Sensing rope cable can be pre-ordered from a 10 feet minimum to any custom run length of up to 165 feet or 50 meters.
Non-sensing cable comes in a standard 20 feet run length.
Powered by the controller unit. No additional power needed.
Full autosense including disconnect alarm.
Typical 125 mWatt, 25 mA.
56 x 55 x 33.3 mm
DIN rail mounting
AKCP does not recommend the ropeWater Sensor to be placed on a conductive surface.